HYDRA-S
CONCRETE INTERNAL CURE
Admixture based on nanotechnology for internal curing and performance gains. Eliminate traditional curing methods and challenges.
The Hydra-S System
HS-ADMIX (48 Hour Cure)
HS-ADMIX EXTREME (24 Hour Cure )
HS-ADMIX EXTREME (24 Hour Cure )
HS-Admix is a pozzolanic dispersion for cementitious mixes that have been manufactured on the nano level. The reactions at the nano level cause a major increase in CSH production, allowing the mix to self-cure by holding and utilizing the water. This effect increases the early and cured strength, reduces permeability, reduces shrinkage, and increases workability.
Our HS-Admix has been formulated to encourage the same concrete hardness and strength that occurs during wet curing, without the same attentive skill and long periods of waiting.
BENEFITS
- 48 Hour Cure Time
- Increases Early & Cured Strength
- Decreases Permeability
- Water-based, Easy to Use Formula
- Increases Abrasion Resistance
- Eliminates Curing Agents
- Complete Slab Densification
- Increases Workability
HS-ADMIX EXTREME (24 Hour Cure )
HS-ADMIX EXTREME (24 Hour Cure )
HS-ADMIX EXTREME (24 Hour Cure )
HS-Admix Extreme is a pozzolanic dispersion for cementitious mixes that have been manufactured on the nano level. The reactions at the nano level cause a major increase in CSH production, allowing the mix to self-cure by holding and utilizing the water. This effect increases the early and cured strength, reduces permeability, reduces shrinkage, and increases workability.
Our HS-Admix has been formulated to encourage the same concrete hardness and strength that occurs during wet curing, without the same attentive skill and long periods of waiting.
BENEFITS
- 24 Hour Cure Time
- Increases Early & Cured Strength
- Decreases Permeability
- Water-based, Easy to Use Formula
- Increases Abrasion Resistance
- Eliminates Curing Agents
- Complete Slab Densification
- Increases Workability
HS-FINISH AID
HS-ADMIX EXTREME (24 Hour Cure )
HS-FINISH AID
HS-Finish Aid is a concrete finishing aid that can be used in-place of water during the screeding, panning,or finishing process to increase workability, enhance the surface strength and reduce permeability making a higher performing surface with less work.
BENEFITS
- Densifies the Surface
- Helps fight Wind, Sunlight, low humidity, Cold
- Increases Workability
- Makes Shake-On Hardeners easier to install Replaces Water
- Reduces Permeability
- Reduces Moisture Vapor Transmission
- Reduces Curling / Shrinkage